An agency retainer is profitable when the fee, minus the fully loaded cost of the hours spent delivering it, leaves a margin at or above your target. The test is: margin % = (retainer fee − loaded delivery cost) ÷ retainer fee. A fixed retainer goes underwater at the hour count where loaded cost equals the fee.
Retainer profitability calculator
Enter one retainer to see its true margin, effective hourly rate, and the hour count at which it stops earning your target margin.
Fully loaded cost of the people doing the work — salary plus taxes, benefits and tools.
Media spend, licences or subcontractor costs you bill on at cost.
- Gross margin
- 51.2%
- Gross profit / month
- $4,100
- Delivery cost / month
- $3,900
- Effective hourly rate
- $133
- Break-even at
- 123.1 hrs
- Target margin holds to
- 61.5 hrs
This calculator runs entirely in your browser. Nothing you enter is sent anywhere or stored.
The hard part is not the division. It is the inputs. Industry guidance says over 60% of agencies underestimate the time they spend on retainer clients, and that the true effective hourly rate once all costs are included is often 30 to 40% lower than the rate used for pricing decisions. This page covers the math for one retainer. To find underwater accounts across your whole client book, use the agency gross margin benchmarks guide and the effective bill rate formula.
How do you calculate whether a retainer is profitable?
Compare the monthly fee with the loaded cost of every hour spent on the account, then express the gap as a share of the fee. Use these lines:
Loaded cost = hours worked × loaded cost per hour
Gross profit = retainer fee − loaded cost
Margin % = gross profit ÷ retainer fee
Effective hourly rate = retainer fee ÷ hours worked
Break-even hours = retainer fee ÷ loaded cost per hour
Use actual hours from time tracking, not the hours you scoped. The scoped number is how you priced the deal. The actual number is how it performed.
Margin is measured against price, not cost. AgencyPro flags the common error: marking up $4,250 of cost by 50% gives $6,375, but the margin on that price is $2,125 ÷ $6,375, or 33.3%, not 50%. To keep a 50% margin, divide cost by 0.5.
Inputs
You need five inputs per retainer. Each should be measurable from your time tracker and your books.
| Input | What to enter | Where it comes from |
|---|---|---|
| Monthly retainer fee | Net fee you invoice for the service, excluding pass-through ad spend | Invoice or contract |
| Actual hours | Delivery hours from everyone who touched the account, including account management and reporting | Time tracking, by client |
| Loaded cost per hour | Blended cost of the people doing the work (see next section) | Payroll, contractor invoices, overhead allocation |
| Direct non-labor costs | Tools, seats, freelancers or assets tied to this client | Books, by client class or tag |
| Target margin | The gross margin you are testing against | Your own policy |
On the target: Rize and ReportsMate both cite 30% to 50% gross margin per retainer as the common range. ReportsMate adds that below 20%, one scope creep or staff change can turn the account unprofitable. Treat these as calculator-vendor guidance, not a measured industry standard, and set your own target from your overhead.
Pass-through ad spend should stay out of the fee you test. Including it inflates revenue and makes every retainer look better than it is. Test margin on your management fee.
What hourly cost should you load into a retainer?
Load a blended cost per productive hour that includes salary or contractor rate, benefits and payroll costs, and an allocation of overhead. A bare pay rate understates cost, which is why retainers look profitable until the P&L disagrees.
Two methods appear in the sources:
- Overhead as a percentage. AlusLabs computes labor cost as the sum of each role's hourly cost times its hours, then total cost with overhead as labor cost × (1 + overhead %).
- Loaded monthly cost per productive hour. Verbial divides loaded monthly cost by 173.3, then by utilization, to get cost per billable hour.
The second method matters for salaried staff. A person who is 70% utilized costs more per productive hour than their pay divided by monthly hours suggests, because the other 30% is still paid. Use the same utilization assumption when you compare accounts.
What gets left out in practice: account management time, status calls, reporting and internal briefing. OnlineLabs lists these among the usual invisible costs, along with scope creep that can consume 20% or more of untracked hours. Log them against the client.
Worked example
The numbers below are a hypothetical illustration, not a benchmark. Consider a hypothetical paid-media agency with a $9,000 monthly management fee (excluding ad spend), a hypothetical loaded cost of $75 per hour, and a hypothetical target margin of 40%.
| Line (all hypothetical) | Math | Result |
|---|---|---|
| Scoped hours (hypothetical) | Agreed in proposal | 60 hours |
| Actual hours (hypothetical) | Strategist, specialist, account manager, reporting | 78 hours |
| Loaded cost, actual (hypothetical) | 78 × $75 | $5,850 |
| Gross profit (hypothetical) | $9,000 − $5,850 | $3,150 |
| Gross margin (hypothetical) | $3,150 ÷ $9,000 | 35.0% |
| Effective hourly rate (hypothetical) | $9,000 ÷ 78 | $115.38 |
In this hypothetical, at scoped hours the same account would cost 60 × $75 = $4,500, a 50.0% margin. The 18 extra hours moved margin 15 percentage points, from 50.0% to 35.0%, and below the hypothetical 40% target.
This is the point of testing on actuals. In this hypothetical, the proposal showed a 50% account, while the timesheet shows a 35% account that needs a scope conversation or a repricing at renewal.
At what hours does a fixed retainer go underwater?
A fixed retainer goes underwater at break-even hours: the fee divided by loaded cost per hour. Beyond that, every extra hour costs more than the account earns.
Using the hypothetical numbers above, with the fee in dollars and loaded cost per hour in dollars:
Break-even hours = $9,000 ÷ $75 = 120 hours
Hours at 40% target margin = ($9,000 × (1 − 0.40)) ÷ $75 = 72 hours
So in this hypothetical, the account misses its target at 72 hours, not 120. The practical ceiling is the target-margin hours, and break-even is the floor you should never reach. Scoping at 60 hours leaves 12 hours of cushion before the target is missed.
| Hours worked (hypothetical) | Loaded cost | Margin on $9,000 fee |
|---|---|---|
| 60 hours (hypothetical) | $4,500 | 50.0% |
| 72 hours (hypothetical) | $5,400 | 40.0% |
| 90 hours (hypothetical) | $6,750 | 25.0% |
| 120 hours (hypothetical) | $9,000 | 0.0% |
Two guards help. First, build a scope buffer into the price. Rize notes agencies typically add 10% to 20% for revisions, status calls and account management. Second, set an overage rate above the retainer's effective hourly rate. Rize says 20% to 30% higher is common, so going over scope costs the client more than buying a bigger package.
OnlineLabs describes alert thresholds when actual hours exceed estimates by 10%, 20% or 30%. A simple version: review any account when mid-month hours run ahead of the plan, before the month closes.
What if the retainer is below target?
When margin is below target, you have three levers: cut hours, raise the fee, or change cost. Choose based on why it slipped.
- Hours crept up. Reset scope in writing, add an overage rate, or reduce deliverables. AgencyPro's advice is to cut committed hours or scope before cutting your margin target.
- Cost rose. If a salary or contractor rate moved, recalculate. Verbial says to reprice at renewal or cut scope when the fee sits at least 15% below a cost-based retainer at your target margin.
- Manual work is the drag. ReportsMate says manual reporting commonly consumes 2 to 4 hours per client per month, which makes it a frequent first fix.
For an agency with many accounts, repeat this per client and roll it into your monthly reporting. That is where a monthly close that ties time to the P&L matters: the margin test is only as good as the hours and costs behind it. The marketing agencies page covers how this fits performance and paid-media agencies.
Frequently Asked Questions
Is gross margin on a retainer the same as net profit?
No. Gross margin here subtracts only delivery cost, and any overhead you load, from the fee. Net profit also subtracts everything else the agency spends. AgencyPro cites a 13% average agency net margin for 2025, so a retainer margin target sits well above it.
Should ad spend be included in the retainer fee when testing margin?
No. Pass-through ad spend is not your revenue, and including it overstates the fee and the margin. Test profitability on your management fee. If you charge a percentage of spend as a fee, include only that fee.
Laya provides this content for informational purposes only. This material does not constitute tax, legal, or accounting advice. Please consult your own tax, legal, and accounting advisors before engaging in any transaction.
If you want to see how client-level margin shows up in a monthly close, see a sample close.
Disclaimer: This article is for general informational purposes only and does not constitute financial, tax, legal, or accounting advice. The information provided is not a substitute for consultation with a qualified professional. Consult a licensed accountant, CPA, or financial advisor for advice specific to your situation.